Video:
Overview
When you want the king of 3D jet’s, you want our J10. But what if you want a scale jet? Then you still want our J10! and this smaller one with 2.2 meter (87").
World known for it’s amazing 3D capabilities, while still not straying too far from the realm of what could almost be scale flying due to it’s delta wing shape and high alpha performance.
Designed with the latest 3D tendencies, the technologies now available and the most popular power plant options on the market, this J10 is both light, strong and with flying characteristics to match the killer looks, whether you want simple acrobatics on unlimited 3D, this is the machine for you.
Features
Extremely lightweight full composite construction especially designed for outstanding 3D performance
Painted outside the mold so no seam lines
Ultra strong and light weight landing gear mounts, with factory installed aluminum mounting plate so mounting is just plug and play
Turbine install in the middle of the fuselage, no need the balance weight on the nose to keep the light weight. All the heavy equipment are in the center of the plane. which is very good for the performance.
Specially designed easy access to turbine for speedy installation
Wings are secured from the top with quick release system. You can put the wing together in less than one minute.
Two piece wing and canard are removable for easy transport
Specifications
Weight
19.53lbs (8.88kg) with M140 turbine, dry weight without fuel
Included Hardware
- Complete air frame (including carbon wing-tubes and preinstalled and painted fibreglass control horns)
- Pilot-RC electric retracts and electric brakes specific for this model
- Servo extension leads
- Vector thrust pipe
- 3500ml fuel tank
- 250ml UAT tank
- Pre-prepared pushrods with ball links
- 7X Pilot-RC high torque servos and extension wires, all pre-installed
Required Hardware
Engine: - 80-130N for normal sport flying
- 140-180N for 3D vector flight – Avoid high speed high G flying
Servos: Total x7 (x4 standard size + x3 medium size)
- x4 standard size high torque (minimum 25kg)
- x2 per aileron
- x1 on canard
- x1 on rudder
- x3 medium size servo (size: 35x15x30mm)
- x2 medium size servo (size: 35x15x30mm) (minimum 16kg)
- x1 for steering x1 for vector (also can use with standard servo size too)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
Recommended Hardware
Servos: Pilot-Rc PW37AH for canard and rudder
Servos: Pilot-Rc PW27AH for aileron and vector
Servos: Pilot-Rc PW16AH for vector
Servos: Pilot-Rc PY10AH for steering
Servos Arms: Pilot-Rc 1,2" and 0,8" Aluminium arms (included with Pilot-Rc servos)
Build Info
CONTROL THROWS FOR 3D FLIGHT:
- Aileron: 40mm
- Rudder: 30mm
- Elevator: 36mm
- Vector:
- X Axis: 28.5mm
- Y Axis: 20mm
CONTROL THROWS FOR NORMAL FLIGHT:
- Aileron: 21mm
- Rudder: 22mm
- Elevator: 21mm
- Vector:
CENTER OF GRAVITY:
- 320mm from the front leading edge on the root of the wing
PNP (Turbine Ready)
- Complete air frame (including carbon wing-tubes and preinstalled and painted fibreglass control horns)
- Pilot-RC electric retracts and electric brakes specific for this model
- Servo extension leads
- Vector thrust pipe
- 3500ml fuel tank
- 250ml UAT tank
- Pre-prepared pushrods with ball links
- 7X Pilot-RC high torque servos and extension wires, all pre-installed
- Free Banana Hobby Heavy Duty Maintenance Stand ($89.90 value)
- Free Domestic Shipping (lower 48 states)
- Required Engine:
- 80-130N for normal sport flying
- 140-180N for 3D vector flight – Avoid high speed high G flying
- Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
|