This is the 2007 upgraded version of the popular 4 channel 76#C model. 76#C1 is 6CH which can fly inverted and 3D maneuvers. The 76#C1 comes with all the neccesary parts for upgrading to 6CH. This helicopter is high performance with 100% pre-built and ready to fly. You can lock your pre-set PIT & PLT parameter so you don't have to set it up everytime when you fly. A detailed English flying manual is included in the package not only Just teach you take off and landing, but also teach you in 3D Aerobatic Flying, such as rolling and looping. Optional Li- poly battery will help to achieve better performance and longer flight time.

• 6 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , and multistage electricity volume show on the panel
• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• Upgraded version of the 4 Channel 76#C Helicopter
• Perfect for people who wants to fly both 4CH/6CH heicopters
• Can be upgraded (Upgrade parts are included in this package) to 3D aerobatic helicopter and fly 3D maneuvers
• Changing some parts and setting can upgrade helicopter to 3D model, and make it perform 3D aerobatic flight
• The structure adopting fiber main frame and metal tail boom makes helicopter more stable
• Metal main frame and metal tail boom make the HM 76#C1 firm, stable, and simplified, and the servos are easy to be mounted
• High quality servo is prompt in reaction; it matches with the strong magnetic N30 tail motor and can fly vario flight courses
• The high performance 370SD motor makes drive powerful and flight stable
• The HM 76#C1 mounted with collective pitch will fly 6 - 9 minutes on 8 cell 9.6V 750mAh Ni-MH battery pack
• 4-in-1 receiver mixes together the circuits of receiver, speed controller, gyro and mixer. It is of compacted size, high sensitivity, and strong anti-interference
• Matched with completely symmetrical main rotor blade and beautiful design
• NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• Outer-rotor motor as the main power is powerful and makes the flight much stable
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• CCPM mode with adjustable pitch system and 3D conversion
• Autorotation landing protection
• One-way bearing and landing system with flameout function
• Mode lock switch to free lock the parameters of PIT & PLT
• Main rotor driven by powerful 370SD motor and tail rotor driven by N30 tail motor
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• PCM receiving and transmitting system increases the operation stability
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Provide excellent performance outdoor and indoor
• Easy to fly and more stable lifting
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Stadium
• Approximately 9 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available.
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Main Rotor Diameter: 555mm (22 inch)
• Tail Rotor Diameter: 150mm (6 inch)
  
• Overall Length: 560mm (22 inch)
• All-up Weight: 355g (Battery included)
• Main Motor: 370SD carbon brushed motor
• Tail Motor: N30 (Strong magnet)
• Servo: 3 x 8.5g Servos (speed 0.11sec/60°; torque 0.9kg/cm ; dimension 22.5X11.5X24mm)
• Gyro: Built-in
• Battery: 9.6V 750mAh Ni-MH
• Control system: 6CH Multifunctional WK-601 FM Radio Transmitter and RX-609 Receiver
• Radio Control Range: 3300 feet (1000m)

• Helicopter (100% Assembled)
• 6 Channel Multifunctional FM Transmitter
• Wall Battery Charger
• 9.6V 750mAh Ni-MH Rechargeable Battery
• English Manual