Available Package Options
Flight review of the MIG-29 Twin 70mm 360 Degree Thrust Vectoring RTF EDF JET!
Flying Skill Level:Advanced and experienced pilots recommended.
Build Level:Detailed airplane assembly required. Extensive wiring and configuration of internal electronics is required. Please test all electronics individually and dry fit fuselage components before gluing and assembling.
Maintenance Level:After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection. Check all retract landing gears screws where applicable. Check small set screws and use lock tight on retract screws where needed. Check screws to servos holding the servo horn in place. Make sure they are tight. Check screws holding down servos in place. Check motor to ESC connections for solid contact. Check screws holding down main wings, tail wings, vertical wings etc. Check glue joints and or areas glued for proper adhesion.
Copyright © Banana Hobby, All rights reserved. All prices and specifications are subject to change without notice. Banana Hobby is not responsible for typographical errors. All typographical errors are subject to correction.