Custom Page1AUTO_GENERATED_MAINITEM_ID
Custom Page2AUTO_GENERATED_SITEMAP_BRIEFS
Custom Page3

[1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21  Next

Browse our Website

RC Airplanes

Flight Trainers

Sailplanes & Gliders

  • 5 CH Xfly-Model Swift 2100 RC Glider PNP 5 CH Xfly-Model Swift 2100 RC Glider PNP

    XFly Model is proud to announce their first RC glider Swift 2100 that is easy to hand launch, quick to build and fun to fly! CFD(Computational Fluid Dynamics) was first used in the aircraft design by XFly team, which has enabled the Swift 2100 to achieve high lift-to-drag ratio and excellent aerodynamic characteristics.

    The Swift 2100 features tough, composite-reinforced EPO foam and precisely positioned carbon fiber reinforcement throughtout. The factory -installed power system, including an efficient 3136-KVlOOO brush less motor and a 40A brush less ESC, paired with a 3S or 4S Lipo battery, delivers plenty of thrust for fast climbs to soaring altitude, sport flying and aerobatics.

    The Swift 2100's efficient aerodynamic design provides extended flight times up to 10-30mins with a mix of power on/off. The bottom wheel and plastic components on the wingtips and the tail allow the pilots to land on hard surface. Wing connectors and glueless design facilitate fast and easy assembly - only 6 screws needed to get the Swift 2100 ready to fly.

    In addition, pilots can remove the folding propeller and add the optional nacelle(with XFly Galaxy 50mm EDF 4S power system installed) to the top of the fuselage for a different flying experience. FPV setup is also feasible with the optional canopy and servo-equipped camera mount available from XFly Model!

Sport Planes

  • 5 CH Xfly-Model Tasman 1500mm RC Trainer Airplane PNP 5 CH Xfly-Model Tasman 1500mm RC Trainer Airplane PNP

    The XFly 1500mm(59.1'') Tasman is a STOL-capable, high-wing airplane featuring sporty flight and aerobatic 3D performance. The Tasman's impressive flight characteristics and large air-filled shock-absorbing Tyres make short takeoffs and aggressive landings on any type of surface easy. The 4S-compatible brushless motor, 40A ESC, 2-blade propeller and a 4S Lipo battery proved to be the optimum setup for power and duration, allowing the plane to hover, roll, loop and fly inverted easily, which makes it highly recommended as an advanced trainer.

    Factory-installed LED navigation lights, plus operational flaps, are functional scale features that take your experience to another level. The Tasman comes equipped with a latch-type top hatch to fit 4S 2200-3300mah batteries for a wide range in performance and flight times.

    If you are looking for an advanced trainer with STOL capabilities, sport performance and simple aerobatic 3D capabilities, look no further than the XFly Tasman!

  • 4 CH Xfly-Model Glastar V2 1233mm (48.5") RC Trainer Airplane PNP 4 CH Xfly-Model Glastar V2 1233mm (48.5") RC Trainer Airplane PNP

    The all-new XFly GlaStar V2 bush/trainer plane is a high performance, durable, all terrain, STOL-capable, high-wing sport model. The GlaStar's impressive flight characteristics and large air-filled shock-absorbing tires makes short takeoffs and landings on any type of surface easy!

    The Glasair GlaStar (sometimes Glastar) is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation.

    The new XFly GlaStar V2 now features a recognizable color scheme, thicker air-filled tires and reinforced aluminum landing strut. In addtion, Version 2 also upgraded power system, including an uprated motor and a 40A ESC, is compatible with both 3S and 4S LiPo batteries that meets RC pilots' need for more power and speed.

Warbirds & Militaries

  • 8 CH BlitzRCWorks Super B-25 Mitchell Bomber RC Warbird Airplane ARF 8 CH BlitzRCWorks Super B-25 Mitchell Bomber RC Warbird Airplane ARF
  • 7 CH BlitzRCWorks Navy 1100mm T-28 Trojan V2 RC Warbird Airplane PNP 7 CH BlitzRCWorks Navy 1100mm T-28 Trojan V2 RC Warbird Airplane PNP

    The BlitzRCworks T-28 Trojan is yet another addition to our fresh new lineup of 1100mm 6channel aircraft! The T-28 Trojan is probably the most Iconic of all model foam warbirds and is even known worldwide for its very friendly handling characteristics, not to mention having been the first “low wing” plane for many a pilot new to the hobby. The BlitzRCworks T-28 is yet another very high detail and high quality 6 channel model which comes available in 2 eye catching color schemes - the Iconic Red/White “NAVY” Training Squadron (VT) scheme, and the even more iconic “jolly Rogers” scheme (VF-84 at the time the T-28 was in service). Made from our high quality EPO Flex foam the BlitzRCworks T-28 is extremely well detailed and finished in both colour schemes to a level that will almost certainly impress and exceed expectations especially at this scale and price point, and with Power to the scale 3 blade 10x6” prop supplied from your 4s-2200mAH lipo (not included) via 45amp ESC to the 3536-750kv motor delivering impressive performance for its class. The model also features working tricycle gear (with gear doors), working scale flaps and dive brake, scale Navigation lights, and for those of you with FPV in mind the canopy even comes pre-designed for FPV adaptation! Both versions feature a low part count and glueless assembly so you can be in the air in under an hour easily!

  • 8 CH BlitzRCWorks Super B-25 Mitchell Bomber RC Warbird Airplane PNP 8 CH BlitzRCWorks Super B-25 Mitchell Bomber RC Warbird Airplane PNP
  • 8 CH BlitzRCWorks Camo Super P-40E Warhawk RC Warbird Airplane PNP 8 CH BlitzRCWorks Camo Super P-40E Warhawk RC Warbird Airplane PNP

    The BlitzRCworks Super P-40E Warhawk is one of the largest Warbirds in the BlitzRCworks range and is also the largest scale P40E available on the EPO foam Warbird market. The world famous Shark mouth decal and big red spinner with 18” Propeller will instantly draw attention to this beautifully detailed Scale warbird which features a raft of Scale features such as Split flaps, Navigation lights (in the wings and tail), 90° servoless Metal Retracts with compression struts (main landing gear), retracting tailwheel, functioning gear doors (main and tailwheel), Scale Gunsight, Sliding canopy, and more.

    Power to the 18x8 3 Blade Propeller is provided by a 5060-290kv motor and 80A Hobbywing ESC from your 6s 4000mAh 25c Lipo battery (not included). The Aircraft features full 6 channel control (ail/Ele/Thr/Rud/Flaps/Gear), with all control inputs taken care of with 9g Analog metal gear servos. Power to the Navigation lights is provided either by a 7th channel, or a Y-Lead from one of the other channels (if you only have a 6 channel Receiver).The main airframe construction is High quality EPO Foam, with a 3 piece main wing that has removable outer wing sections (outside the flaps) for ease of transport, with full carbon Spars throughout to guarantee structural integrity when assembled and performing all manner of loops, rolls, and Scale maneuvers. The BlitzRCworks Super P-40E has outstanding presence and friendly handling in the air. Combine that with the Scale detail, quality retracts/electronics, and flight times of up to 15 minutes (with throttle management) and you have a fantastic Scale model that is hard to beat.

  • 8 CH BlitzRCWorks Green Super P-40E Warhawk RC Warbird Airplane PNP 8 CH BlitzRCWorks Green Super P-40E Warhawk RC Warbird Airplane PNP

    The BlitzRCworks Super P-40E Warhawk is one of the largest Warbirds in the BlitzRCworks range and is also the largest scale P40E available on the EPO foam Warbird market. The world famous Shark mouth decal and big red spinner with 18” Propeller will instantly draw attention to this beautifully detailed Scale warbird which features a raft of Scale features such as Split flaps, Navigation lights (in the wings and tail), 90° servoless Metal Retracts with compression struts (main landing gear), retracting tailwheel, functioning gear doors (main and tailwheel), Scale Gunsight, Sliding canopy, and more.

    Power to the 18x8 3 Blade Propeller is provided by a 5060-290kv motor and 80A Hobbywing ESC from your 6s 4000mAh 25c Lipo battery (not included). The Aircraft features full 6 channel control (ail/Ele/Thr/Rud/Flaps/Gear), with all control inputs taken care of with 9g Analog metal gear servos. Power to the Navigation lights is provided either by a 7th channel, or a Y-Lead from one of the other channels (if you only have a 6 channel Receiver).The main airframe construction is High quality EPO Foam, with a 3 piece main wing that has removable outer wing sections (outside the flaps) for ease of transport, with full carbon Spars throughout to guarantee structural integrity when assembled and performing all manner of loops, rolls, and Scale maneuvers. The BlitzRCworks Super P-40E has outstanding presence and friendly handling in the air. Combine that with the Scale detail, quality retracts/electronics, and flight times of up to 15 minutes (with throttle management) and you have a fantastic Scale model that is hard to beat.

  • 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane PNP 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane PNP
  • 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane ARF 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane ARF
  • 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane RTF 5 CH BlitzRCWorks F4F Wildcat RC Warbird Airplane RTF
  • 5 CH BlitzRCWorks Coast Guard VTOL V-22 Osprey RC Warbird Airplane PNP 5 CH BlitzRCWorks Coast Guard VTOL V-22 Osprey RC Warbird Airplane PNP

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 8 CH BlitzRCWorks Green Super P-40E Warhawk RC Warbird Airplane ARF 8 CH BlitzRCWorks Green Super P-40E Warhawk RC Warbird Airplane ARF

    The BlitzRCworks Super P-40E Warhawk is one of the largest Warbirds in the BlitzRCworks range and is also the largest scale P40E available on the EPO foam Warbird market. The world famous Shark mouth decal and big red spinner with 18” Propeller will instantly draw attention to this beautifully detailed Scale warbird which features a raft of Scale features such as Split flaps, Navigation lights (in the wings and tail), 90° servoless Metal Retracts with compression struts (main landing gear), retracting tailwheel, functioning gear doors (main and tailwheel), Scale Gunsight, Sliding canopy, and more.

    Power to the 18x8 3 Blade Propeller is provided by a 5060-290kv motor and 80A Hobbywing ESC from your 6s 4000mAh 25c Lipo battery (not included). The Aircraft features full 6 channel control (ail/Ele/Thr/Rud/Flaps/Gear), with all control inputs taken care of with 9g Analog metal gear servos. Power to the Navigation lights is provided either by a 7th channel, or a Y-Lead from one of the other channels (if you only have a 6 channel Receiver).The main airframe construction is High quality EPO Foam, with a 3 piece main wing that has removable outer wing sections (outside the flaps) for ease of transport, with full carbon Spars throughout to guarantee structural integrity when assembled and performing all manner of loops, rolls, and Scale maneuvers. The BlitzRCworks Super P-40E has outstanding presence and friendly handling in the air. Combine that with the Scale detail, quality retracts/electronics, and flight times of up to 15 minutes (with throttle management) and you have a fantastic Scale model that is hard to beat.

  • 8 CH BlitzRCWorks Camo Super P-40E Warhawk RC Warbird Airplane ARF 8 CH BlitzRCWorks Camo Super P-40E Warhawk RC Warbird Airplane ARF

    The BlitzRCworks Super P-40E Warhawk is one of the largest Warbirds in the BlitzRCworks range and is also the largest scale P40E available on the EPO foam Warbird market. The world famous Shark mouth decal and big red spinner with 18” Propeller will instantly draw attention to this beautifully detailed Scale warbird which features a raft of Scale features such as Split flaps, Navigation lights (in the wings and tail), 90° servoless Metal Retracts with compression struts (main landing gear), retracting tailwheel, functioning gear doors (main and tailwheel), Scale Gunsight, Sliding canopy, and more.

    Power to the 18x8 3 Blade Propeller is provided by a 5060-290kv motor and 80A Hobbywing ESC from your 6s 4000mAh 25c Lipo battery (not included). The Aircraft features full 6 channel control (ail/Ele/Thr/Rud/Flaps/Gear), with all control inputs taken care of with 9g Analog metal gear servos. Power to the Navigation lights is provided either by a 7th channel, or a Y-Lead from one of the other channels (if you only have a 6 channel Receiver).The main airframe construction is High quality EPO Foam, with a 3 piece main wing that has removable outer wing sections (outside the flaps) for ease of transport, with full carbon Spars throughout to guarantee structural integrity when assembled and performing all manner of loops, rolls, and Scale maneuvers. The BlitzRCworks Super P-40E has outstanding presence and friendly handling in the air. Combine that with the Scale detail, quality retracts/electronics, and flight times of up to 15 minutes (with throttle management) and you have a fantastic Scale model that is hard to beat.

  • 5 CH BlitzRCWorks Coast Guard VTOL V-22 Osprey RC Warbird Airplane RTF 5 CH BlitzRCWorks Coast Guard VTOL V-22 Osprey RC Warbird Airplane RTF

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Tactic Gray VTOL V-22 Osprey RC Warbird Airplane PNP 5 CH BlitzRCWorks Tactic Gray VTOL V-22 Osprey RC Warbird Airplane PNP

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Military Gray VTOL V-22 Osprey RC Warbird Airplane RTF 5 CH BlitzRCWorks Military Gray VTOL V-22 Osprey RC Warbird Airplane RTF

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Snow Camo VTOL V-22 Osprey RC Warbird Airplane PNP 5 CH BlitzRCWorks Snow Camo VTOL V-22 Osprey RC Warbird Airplane PNP

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Snow Camo VTOL V-22 Osprey RC Warbird Airplane RTF 5 CH BlitzRCWorks Snow Camo VTOL V-22 Osprey RC Warbird Airplane RTF

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Tactic Gray VTOL V-22 Osprey RC Warbird Airplane RTF 5 CH BlitzRCWorks Tactic Gray VTOL V-22 Osprey RC Warbird Airplane RTF

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 5 CH BlitzRCWorks Military Gray VTOL V-22 Osprey RC Warbird Airplane PNP 5 CH BlitzRCWorks Military Gray VTOL V-22 Osprey RC Warbird Airplane PNP

    The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

  • 7 CH BlitzRCWorks Jolly Rogers 1100mm T-28 Trojan V2 RC Warbird Airplane RTF 7 CH BlitzRCWorks Jolly Rogers 1100mm T-28 Trojan V2 RC Warbird Airplane RTF

    The BlitzRCworks T-28 Trojan is yet another addition to our fresh new lineup of 1100mm 6channel aircraft! The T-28 Trojan is probably the most Iconic of all model foam warbirds and is even known worldwide for its very friendly handling characteristics, not to mention having been the first “low wing” plane for many a pilot new to the hobby. The BlitzRCworks T-28 is yet another very high detail and high quality 6 channel model which comes available in 2 eye catching color schemes - the Iconic Red/White “NAVY” Training Squadron (VT) scheme, and the even more iconic “jolly Rogers” scheme (VF-84 at the time the T-28 was in service). Made from our high quality EPO Flex foam the BlitzRCworks T-28 is extremely well detailed and finished in both colour schemes to a level that will almost certainly impress and exceed expectations especially at this scale and price point, and with Power to the scale 3 blade 10x6” prop supplied from your 4s-2200mAH lipo (not included) via 45amp ESC to the 3536-750kv motor delivering impressive performance for its class. The model also features working tricycle gear (with gear doors), working scale flaps and dive brake, scale Navigation lights, and for those of you with FPV in mind the canopy even comes pre-designed for FPV adaptation! Both versions feature a low part count and glueless assembly so you can be in the air in under an hour easily!

  • 7 CH BlitzRCWorks Navy 1100mm T-28 Trojan V2 RC Warbird Airplane RTF 7 CH BlitzRCWorks Navy 1100mm T-28 Trojan V2 RC Warbird Airplane RTF

    The BlitzRCworks T-28 Trojan is yet another addition to our fresh new lineup of 1100mm 6channel aircraft! The T-28 Trojan is probably the most Iconic of all model foam warbirds and is even known worldwide for its very friendly handling characteristics, not to mention having been the first “low wing” plane for many a pilot new to the hobby. The BlitzRCworks T-28 is yet another very high detail and high quality 6 channel model which comes available in 2 eye catching color schemes - the Iconic Red/White “NAVY” Training Squadron (VT) scheme, and the even more iconic “jolly Rogers” scheme (VF-84 at the time the T-28 was in service). Made from our high quality EPO Flex foam the BlitzRCworks T-28 is extremely well detailed and finished in both colour schemes to a level that will almost certainly impress and exceed expectations especially at this scale and price point, and with Power to the scale 3 blade 10x6” prop supplied from your 4s-2200mAH lipo (not included) via 45amp ESC to the 3536-750kv motor delivering impressive performance for its class. The model also features working tricycle gear (with gear doors), working scale flaps and dive brake, scale Navigation lights, and for those of you with FPV in mind the canopy even comes pre-designed for FPV adaptation! Both versions feature a low part count and glueless assembly so you can be in the air in under an hour easily!

  • 7 CH BlitzRCWorks Jolly Rogers 1100mm T-28 Trojan V2 RC Warbird Airplane PNP 7 CH BlitzRCWorks Jolly Rogers 1100mm T-28 Trojan V2 RC Warbird Airplane PNP

    The BlitzRCworks T-28 Trojan is yet another addition to our fresh new lineup of 1100mm 6channel aircraft! The T-28 Trojan is probably the most Iconic of all model foam warbirds and is even known worldwide for its very friendly handling characteristics, not to mention having been the first “low wing” plane for many a pilot new to the hobby. The BlitzRCworks T-28 is yet another very high detail and high quality 6 channel model which comes available in 2 eye catching color schemes - the Iconic Red/White “NAVY” Training Squadron (VT) scheme, and the even more iconic “jolly Rogers” scheme (VF-84 at the time the T-28 was in service). Made from our high quality EPO Flex foam the BlitzRCworks T-28 is extremely well detailed and finished in both colour schemes to a level that will almost certainly impress and exceed expectations especially at this scale and price point, and with Power to the scale 3 blade 10x6” prop supplied from your 4s-2200mAH lipo (not included) via 45amp ESC to the 3536-750kv motor delivering impressive performance for its class. The model also features working tricycle gear (with gear doors), working scale flaps and dive brake, scale Navigation lights, and for those of you with FPV in mind the canopy even comes pre-designed for FPV adaptation! Both versions feature a low part count and glueless assembly so you can be in the air in under an hour easily!

  • 5 CH Sky Flight Hobby Red P-51D Mustang 1200mm RC Warbird Airplane PNP 5 CH Sky Flight Hobby Red P-51D Mustang 1200mm RC Warbird Airplane PNP
  • 5 CH Sky Flight Hobby Yellow P-51D Mustang 1200mm RC Warbird Airplane PNP 5 CH Sky Flight Hobby Yellow P-51D Mustang 1200mm RC Warbird Airplane PNP

Discontinued Aircraft

Flight Trainers

Warbirds & Militaries (1)
Warbirds & Militaries (2)
Warbirds & Militaries (3)

Sailplanes & Gliders

FPV Planes

RC Airplane Parts

Air Epic (1)
Air Epic (2)

All Air Epic RC Plane Parts

Air Epic 5 CH Red Sky Trainer N9258 w Flaps 1400mm RC Trainer Airplane Parts (1)
Air Epic 5 CH Red Sky Trainer N9258 w Flaps 1400mm RC Trainer Airplane Parts (2)

Air Epic 5 CH Red Sky Trainer G Kemy w Flaps 1400mm RC Trainer Airplane Parts (1)
Air Epic 5 CH Red Sky Trainer G Kemy w Flaps 1400mm RC Trainer Airplane Parts (2)

Air Epic 6 CH Red Diamond 90mm RC EDF Jet Parts (1)
Air Epic 6 CH Red Diamond 90mm RC EDF Jet Parts (2)

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet
  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Air Epic 6 CH Red Diamond 90mm RC EDF Jet
  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Banana Hobby Radio Strap for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Zap Zap Z-Poxy 30 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 30 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Zap's 30 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. Packaged in a 8 oz bottle set (One 4oz Bottle Z-Poxy Resin & One 4oz Bottle Z-Poxy Hardener)

    Features:

    • 15 min. work time, cures in 30
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Produces a tough permanent bond in just 30 minutes
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • Zap Zap Z-Poxy 5 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 5 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Zap's 5 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. This product retains all of the physical strengthsof epoxy adhesives while offering the added advantage of quick settingeven in thin films at low temperatures. It will bond wood and nearlyall other types of materials, including concrete. It achieves itsterrific strength as a result of a chemical reaction when mixed withthe Hardening agent. Non-shrinking Clear, equal-mix. Cures in 5 minutes. Vibration resistant formula. Durable, sandable. Excellent for furniture. Packaged in a 8 oz bottle set (One 4oz Bottle Z-Poxy Resin & One 4oz Bottle Z-Poxy Hardener)

    Features:

    • Cures in 5 minutes
    • Perfect for on-the-spot field repairs
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • Zap Zap Z-Poxy 15 Minute Epoxy Glue Set (4 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 15 Minute Epoxy Glue Set (4 oz) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Zap's 15 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. This product retains all of the physical strengthsof epoxy adhesives while offering the added advantage of quick settingeven in thin films at low temperatures. It will bond wood and nearlyall other types of materials, including concrete. It achieves itsterrific strength as a result of a chemical reaction when mixed withthe Hardening agent. Non-shrinking Clear, equal-mix. Cures in 15 minutes. Vibration resistant formula. Durable, sandable. Excellent for furniture. Packaged in a 4 oz bottle set (One 2oz Bottle Z-Poxy Resin & One 2oz Bottle Z-Poxy Hardener)

    Features:

    • Cures in 15 minutes
    • Perfect for on-the-spot field repairs
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • FrSky FrSky Black Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Black) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet FrSky FrSky Black Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Black) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • FrSky FrSky Red Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Red) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet FrSky FrSky Red Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Red) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • FrSky FrSky Blue Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Blue) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet FrSky FrSky Blue Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Blue) for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • Banana Hobby Heavy Duty RC Model Maintenance Stand for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Banana Hobby Heavy Duty RC Model Maintenance Stand for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing the Heavy Duty RC Model Maintenance Stand from Banana Hobby, a game-changer for model aircraft enthusiasts seeking reliability, user-friendliness, and unparalleled versatility. This stand raises the bar by offering a wide range of applications for aircraft types, including electric foam models and large composite turbine jets.

    The stand's innovative screwless quick-switch-lock design allows for effortless height adjustments, allowing for seamless accommodation of various aircraft sizes. Crafted with a sturdy and adjustable construction, this stand provides a secure and dependable platform for working on model airplanes. With customizable height settings, it ensures comfortable and convenient access to every part of the aircraft during maintenance, repairs, or modifications. To further enhance stability, the stand is equipped with non-slip rubber grips, providing exceptional grip to prevent accidental slips or damage to your cherished model. With outstanding durability, remarkable versatility, and user-friendly features, the Banana Hobby Maintenance RC Model Airplane Stand elevates the maintenance experience and plays a pivotal role in extending the longevity and optimizing the performance of your beloved model aircraft.

  • Banana Hobby RC Airplane Storage Rack System (33.5") for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Banana Hobby RC Airplane Storage Rack System (33.5") for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing our newest addition: the RC Airplane Storage Rack System, found exclusively on bananahobby.com. Experience the ultimate organization and protection for your RC airplanes with this stylish and efficient storage solution.

    Choose the ideal fit for your planes from our two width options: 33.5” or 18.5”.

    Six adjustable locations enable personalized customization of the rack to accommodate various RC airplane sizes in terms of both height and width. Whether you own smaller planes or larger models, rest assured, we have you covered!

    Crafted with high-grade steel for enhanced durability and strength, and thoughtfully designed with robust foam protection to ensure your valuable airplanes remain safe and sound.

    Get your RC Airplane Storage Rack System now, and keep your aircraft collection organized like a pro pilot!

  • Banana Hobby RC Airplane Storage Rack System (18.5") for Air Epic 6 CH Red Diamond 90mm RC EDF Jet Banana Hobby RC Airplane Storage Rack System (18.5") for Air Epic 6 CH Red Diamond 90mm RC EDF Jet

    Introducing our newest addition: the RC Airplane Storage Rack System, found exclusively on bananahobby.com. Experience the ultimate organization and protection for your RC airplanes with this stylish and efficient storage solution.

    Choose the ideal fit for your planes from our two width options: 33.5” or 18.5”.

    Six adjustable locations enable personalized customization of the rack to accommodate various RC airplane sizes in terms of both height and width. Whether you own smaller planes or larger models, rest assured, we have you covered!

    Crafted with high-grade steel for enhanced durability and strength, and thoughtfully designed with robust foam protection to ensure your valuable airplanes remain safe and sound.

    Get your RC Airplane Storage Rack System now, and keep your aircraft collection organized like a pro pilot!

Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Parts (1)
Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Parts (2)

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet
  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Zap Zap Z-Poxy 30 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 30 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Zap's 30 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. Packaged in a 8 oz bottle set (One 4oz Bottle Z-Poxy Resin & One 4oz Bottle Z-Poxy Hardener)

    Features:

    • 15 min. work time, cures in 30
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Produces a tough permanent bond in just 30 minutes
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • Zap Zap Z-Poxy 5 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 5 Minute Epoxy Glue Set (8 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Zap's 5 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. This product retains all of the physical strengthsof epoxy adhesives while offering the added advantage of quick settingeven in thin films at low temperatures. It will bond wood and nearlyall other types of materials, including concrete. It achieves itsterrific strength as a result of a chemical reaction when mixed withthe Hardening agent. Non-shrinking Clear, equal-mix. Cures in 5 minutes. Vibration resistant formula. Durable, sandable. Excellent for furniture. Packaged in a 8 oz bottle set (One 4oz Bottle Z-Poxy Resin & One 4oz Bottle Z-Poxy Hardener)

    Features:

    • Cures in 5 minutes
    • Perfect for on-the-spot field repairs
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • Zap Zap Z-Poxy 15 Minute Epoxy Glue Set (4 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Zap Zap Z-Poxy 15 Minute Epoxy Glue Set (4 oz) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Zap's 15 Minute Z-Poxy is resistant to shock and solvents, is non-brittle, easy to sand and has excellent gap filling characteristics. This product retains all of the physical strengthsof epoxy adhesives while offering the added advantage of quick settingeven in thin films at low temperatures. It will bond wood and nearlyall other types of materials, including concrete. It achieves itsterrific strength as a result of a chemical reaction when mixed withthe Hardening agent. Non-shrinking Clear, equal-mix. Cures in 15 minutes. Vibration resistant formula. Durable, sandable. Excellent for furniture. Packaged in a 4 oz bottle set (One 2oz Bottle Z-Poxy Resin & One 2oz Bottle Z-Poxy Hardener)

    Features:

    • Cures in 15 minutes
    • Perfect for on-the-spot field repairs
    • Works best on Metal/Rubber/Plastics/Aluminum/Ceramic/Fiberglass/Furniture/Wood/Glass/Leather
    • Cures Completely Clear
    • Sands easily to a smooth finish
    • Great for fiberglass fuselages, boat hulls, skinning foam parts

  • FrSky FrSky Black Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Black) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet FrSky FrSky Black Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Black) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • FrSky FrSky Red Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Red) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet FrSky FrSky Red Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Red) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • FrSky FrSky Blue Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Blue) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet FrSky FrSky Blue Tandem X20S Dual-Band Telemetry 24-Channel Radio System(Blue) for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Banana Hobby offers a wide variety of RC planes, ranging from beginner models to more advanced ones, such as high-end EDF and turbine jets. Many of these planes require between 9 and 12 channels to operate, which means you'll need a transmitter with a minimum of 16 channels to ensure compatibility with all the models available.

    The FrSky Tandem series of transmitters are indeed an excellent choice for aspiring pilots looking to advance their skills in the world of radio-controlled (RC) aviation. As pilots progress/transitioning from basic planes to more complex Electric Ducted Fan (EDF) and Turbine Jet models, they require a reliable and feature-rich transmitter to ensure precise control over their aircraft. More than just a transitional system, the Tandem line of radios offers a wide variety of receivers, sensors, and accessories that will grow with you and keep you engaged as you progress into turbine jets. Tandem radios not only provide the best control link in the industry but also deliver the best value in RC transmitters available.

    The Ethos user interface is stylish, user-friendly, elegant, and incredibly powerful. The full-color touchscreen menu system makes setting up and adjusting planes at the field a breeze. With the help of numerous online videos and resources, you'll quickly become proficient with the radio. This transmitter is so enjoyable to hold and use that you'll be eager to show it off to your friends at the flying field. It's a radio that can unlock the full potential of your RC planes and jets, fuel your passion for RC, and make you excited to go flying!

    The X20/X20S Tandem transmitter is an excellent choice, as it is a full resolution 24-channel radio system compatible with all the planes offered by Banana Hobby. This versatile transmitter will allow you to operate any model you choose, from beginner planes to advanced EDF and turbine jets.

    By investing in the X20/X20S transmitter, you won't have to worry about purchasing a new system when you decide to upgrade to a more advanced plane, saving you both time and money in the long run. Additionally, the X20/X20S provides plenty of room for growth as you progress in the hobby, making it a wise investment for both novice and experienced RC pilots alike.

    Banana Hobby Collaborates Closely with FrSky

    Banana Hobby is committed to working closely with the FrSky radio system in order to ensure seamless integration for both current and future model aircraft offerings. Our collaboration is aimed at enhancing the user experience for RC enthusiasts by providing optimal compatibility between our products. To further support our customers, we will consistently update and expand our database of aircraft flight settings. These settings files will be readily available for download, allowing users to easily configure their FrSky radio systems to match their Banana Hobby aircraft, and fully enjoy the benefits of this powerful and reliable technology.

    Tandem - The next generation in RC transmitters

    The RC flying hobby is undoubtedly evolving, and the 18 and X18S dual-band transmitters, as well as the X20/X20S transmitters, represent a significant leap forward. These transmitters and their cutting-edge features allow pilots to stay ahead of the curve as the hobby continues to change.

    One key advantage of the 18 and X18S transmitters is their dual-band technology, transmitting on both 2.4GHz and 900MHz frequencies simultaneously. This ensures a reliable connection, even in crowded radio environments, and prevents failsafes due to signal loss. This signal redundancy instills confidence in pilots, knowing that their beloved planes are less likely to crash.

    The X20/X20S transmitters are designed with user experience in mind. The ergonomic design, high-quality CNC Hall Sensor gimbals, and well-placed switches, sliders, and knobs provide a premium flying experience. The additional buttons and callouts keep pilots informed about their flight without having to look away from their planes.

    The Ethos operating system adds another layer of sophistication to these transmitters. Designed with fixed-wing pilots in mind, Ethos is powerful yet user-friendly. Its simple menus and built-in mixes make it easy to customize your plane's performance while at the flying field. The operating system's power and simplicity make it an ideal choice for pilots of all skill levels.

    In conclusion, the 18 and X18S dual-band transmitters, the X20/X20S transmitters, and the Ethos operating system mark a new era in RC flying. These advanced transmitters and their features provide a premium flying experience without the premium price tag. They are perfect for pilots who want to stay ahead in the ever-evolving world of RC flying and enjoy a reliable, user-friendly, and powerful transmitter system.

    The Frsky Universe

    FrSky provides an extensive and varied selection of RC receivers, servos, speed controllers, and flight safety systems in the industry. They offer specialized receivers specifically for gliders, as well as 18-channel receivers designed for turbine jets. Additionally, if you prefer a stabilized receiver to maintain your plane's level during flight for added safety, FrSky has those available too.

    What It All Means

    We are now entering a new era, leaving behind the days when additional channels came at a premium, dual-band transmitters cost thousands of dollars, telemetry receivers were priced over $100, and full-color LCD touch screen transmitters exceeded $1000.

    The Tandem transmitters first gained popularity among the European turbine jet community, who sought a reliable radio link to safeguard their expensive jets worth tens of thousands of dollars. Scale pilots also recognized the value of Tandem radios, wanting to protect their own valuable investments. Word quickly spread among the flying field community, with many realizing the outstanding capabilities of Tandem radios. Now, for a price lower than that of an entry-level hobby store transmitter, you can own an exceptional 24-channel radio system that will evolve with you as your RC transmitter needs and demands expand.

  • Banana Hobby Heavy Duty RC Model Maintenance Stand for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Banana Hobby Heavy Duty RC Model Maintenance Stand for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing the Heavy Duty RC Model Maintenance Stand from Banana Hobby, a game-changer for model aircraft enthusiasts seeking reliability, user-friendliness, and unparalleled versatility. This stand raises the bar by offering a wide range of applications for aircraft types, including electric foam models and large composite turbine jets.

    The stand's innovative screwless quick-switch-lock design allows for effortless height adjustments, allowing for seamless accommodation of various aircraft sizes. Crafted with a sturdy and adjustable construction, this stand provides a secure and dependable platform for working on model airplanes. With customizable height settings, it ensures comfortable and convenient access to every part of the aircraft during maintenance, repairs, or modifications. To further enhance stability, the stand is equipped with non-slip rubber grips, providing exceptional grip to prevent accidental slips or damage to your cherished model. With outstanding durability, remarkable versatility, and user-friendly features, the Banana Hobby Maintenance RC Model Airplane Stand elevates the maintenance experience and plays a pivotal role in extending the longevity and optimizing the performance of your beloved model aircraft.

  • Banana Hobby RC Airplane Storage Rack System (33.5") for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Banana Hobby RC Airplane Storage Rack System (33.5") for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing our newest addition: the RC Airplane Storage Rack System, found exclusively on bananahobby.com. Experience the ultimate organization and protection for your RC airplanes with this stylish and efficient storage solution.

    Choose the ideal fit for your planes from our two width options: 33.5” or 18.5”.

    Six adjustable locations enable personalized customization of the rack to accommodate various RC airplane sizes in terms of both height and width. Whether you own smaller planes or larger models, rest assured, we have you covered!

    Crafted with high-grade steel for enhanced durability and strength, and thoughtfully designed with robust foam protection to ensure your valuable airplanes remain safe and sound.

    Get your RC Airplane Storage Rack System now, and keep your aircraft collection organized like a pro pilot!

  • Banana Hobby RC Airplane Storage Rack System (18.5") for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet Banana Hobby RC Airplane Storage Rack System (18.5") for Air Epic 6 CH Blue Diamond 90mm RC EDF Jet

    Introducing our newest addition: the RC Airplane Storage Rack System, found exclusively on bananahobby.com. Experience the ultimate organization and protection for your RC airplanes with this stylish and efficient storage solution.

    Choose the ideal fit for your planes from our two width options: 33.5” or 18.5”.

    Six adjustable locations enable personalized customization of the rack to accommodate various RC airplane sizes in terms of both height and width. Whether you own smaller planes or larger models, rest assured, we have you covered!

    Crafted with high-grade steel for enhanced durability and strength, and thoughtfully designed with robust foam protection to ensure your valuable airplanes remain safe and sound.

    Get your RC Airplane Storage Rack System now, and keep your aircraft collection organized like a pro pilot!

Taft Hobby

Taft Hobby 4 CH Super Dimona RC Sailplane Glider Parts

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 14.8V 2200mAh 40C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 14.8V 2200mAh 40C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Overview:

    connector: Dean's

    Dimensions: 102x32x28mm

  • BlitzRCWorks 14.8V 2600mAh 40C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 14.8V 2600mAh 40C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Key Features:

    • Simple design layout for convenience and ease of use
    • Visible display screen for battery details
    • Available charge ports for 2S, 3S and 4S Li-Po/Li-Ion batteries
    • Built-in voltage detector for battery voltage check on display screen
    • Live voltage readout as battery charges
    • Robust aluminum hard case for durability
    • DC 9-16V operating voltage, 12V recommended

    Includes:
    • 2-4S Li-Po/Li-Ion Balance Charger
    • Alligator Clips for 12V Power Supply

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 14.8V 2600mAh 25C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • BlitzRCWorks 14.8V 2500mAh 20C LiPo Battery for Taft Hobby 4 CH Super Dimona RC Sailplane Glider
  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 4 CH Super Dimona RC Sailplane Glider

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Parts

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet
  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet
  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet
  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Red Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Parts

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet
  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet
  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet
  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Brown Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Parts

  • BlitzRCWorks 22.2V 4000mAh 25C (Banana connector) LiPo Battery for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Banana connector) LiPo Battery for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet
  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet
  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet
  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet
  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Snake Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Parts

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet
  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet
  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet
  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Yellow Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Parts

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • BlitzRCWorks 22.2V 4000mAh 25C (Banana connector) LiPo Battery for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Banana connector) LiPo Battery for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet
  • BlitzRCWorks 22.2V 5000mAh 40C LiPo Battery(AS150 connector) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet
  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet
  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet
  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Green Viper 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 5 CH Zebra Giant Dornier Heer DO 27 RC Trainer Airplane Parts

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Simple design layout for convenience and ease of use
    • Visible display screen for battery details
    • Available charge ports for 2S, 3S and 4S Li-Po/Li-Ion batteries
    • Built-in voltage detector for battery voltage check on display screen
    • Live voltage readout as battery charges
    • Robust aluminum hard case for durability
    • DC 9-16V operating voltage, 12V recommended

    Includes:
    • 2-4S Li-Po/Li-Ion Balance Charger
    • Alligator Clips for 12V Power Supply

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 14.8V 3300mAh 25C LiPo Battery for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH Zebra Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

Taft Hobby 5 CH German Giant Dornier Heer DO 27 RC Trainer Airplane Parts

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Dean's (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Simple design layout for convenience and ease of use
    • Visible display screen for battery details
    • Available charge ports for 2S, 3S and 4S Li-Po/Li-Ion batteries
    • Built-in voltage detector for battery voltage check on display screen
    • Live voltage readout as battery charges
    • Robust aluminum hard case for durability
    • DC 9-16V operating voltage, 12V recommended

    Includes:
    • 2-4S Li-Po/Li-Ion Balance Charger
    • Alligator Clips for 12V Power Supply

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks 14.8V 3300mAh 25C LiPo Battery for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH German Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

Taft Hobby 6 CH Quantum 90mm RC EDF Jet Parts

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks 22.2V 4000mAh 25C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Quantum 90mm RC EDF Jet
  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Quantum 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks 29.6V 5500mAh 40C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Quantum 90mm RC EDF Jet
  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Quantum 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 5 CH Red Giant Dornier Heer DO 27 RC Trainer Airplane Parts

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 110~240V AC Wall Adapter for Li-Po Balance Chargers for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 2~4S Li-Po Balance Charger w/ Alligator Charging Clips for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Simple design layout for convenience and ease of use
    • Visible display screen for battery details
    • Available charge ports for 2S, 3S and 4S Li-Po/Li-Ion batteries
    • Built-in voltage detector for battery voltage check on display screen
    • Live voltage readout as battery charges
    • Robust aluminum hard case for durability
    • DC 9-16V operating voltage, 12V recommended

    Includes:
    • 2-4S Li-Po/Li-Ion Balance Charger
    • Alligator Clips for 12V Power Supply

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks 14.8V 3300mAh 25C LiPo Battery for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane
  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 5 CH Red Giant Dornier Heer DO-27 RC Trainer Airplane

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Parts

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks 29.6V 5500mAh 40C (Dean's connector) LiPo Battery for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet
  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (305x234mm) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Gold Aluminum CNC Model Airplane Stand(Gold Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Dean’s (T-Plug) Series Adapter for Double Voltage for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet
  • BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Banana Hobby Radio Strap for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Key Features:

    • Comfortable fit and finish
    • Adjustable strap clips to fit any preference
    • Light-weight and robust

    Includes:
    • Adjustable neck strap

  • Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Sky Flight Hobby 12 Channel 2.4GHz Radio System Set w/ Thrust Vectoring (Transmitter + Receiver) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Key Features:

    • Comfortable transmitter design
    • Simple analog layout for ease of use
    • Available trim tabs for control surfaces
    • 2-way switches for channels 5 and 6, easily accessible with index fingers
    • Separate 3-axis thrust vectoring configuration (3 channels reserved for thrust vectoring only)
    • Available ON/OFF switch for thrust vectoring
    • Available ON/OFF button style switches for channels 10, 11 and 12
    • Pre-set (high and low) 2-way dual rate switch for control surfaces
    • Available Elevon mixing
    • Rear carrying handle
    • Use of 2.4GHz technology

    Includes:
    • 2.4GHz 12 Channel Transmitter
    • 2.4GHz 14 Channel Receiver

  • BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks 1:10 Green Full Body Scaled Jet Pilot Figure for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Feature:
    • 4.3" (109mm) tall pilot figure
    • Made of plastic rubber, very lightweight and durable
    • Only weight 0.8 oz (23 g)
    • Fit perfectly in 1/10th scale planes
    • Can be cut/trimmed into a Bust

  • BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Pilot Figure - Female 60mm(H) x 50mm(W) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet
  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

  • BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks 5 Channel 2.4GHz MC5 Transmitter & Receiver with Flight Simulator Training Kit For RC Airplanes and Helicopters for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Overview:

    This flight simulator kit comes with a transmitter (remote control) that connects directly to a computer's USB port and is made with smooth gimbal sticks. Compared to other flight simulator training softwares, this Flight Simulator Kit is the best in its price range. This simulator software is installed with various 4 CH and 6 CH helicopters and airplanes to help build coordination and polish a pilot's navigation skills. Aircraft sound and a variety of landscapes are also incorporated to provide a more realistic flight.

    A versatile multi-purpose 2.4Ghz 5Ch radio system is supplied with this kit, permitting its use with both simulation software via a special USB cable in addition to most RC aircraft under 5 Channels.The kit includes the radio system (Transmitter and Receiver), one bind plug, USB cable, and simulator software CD.

  • BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks NX3 3-Axis Airplane Gyro for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Features:

    1. Four Model Types are supported: Single Aileron, Dual Ailerons (Flaperons), Delta-Wing and V-Tail.
    2. Three Flight Modes are supported:
         a. Standard/Rate Mode: Gyro will make the corrections for stabilization.
         b. Hold Mode: Gyro will be standing by for calibration.
         c. Gyro ‘Off’ Mode: Gyro is disengaged and total control is given to the transmitter.
    3. Two kinds of Gain Control Methods are supported: ‘Master Gain’ for the radio and ‘Independent Axis Gain’ from the Variable resistor on the NX3 board.
    4. Using the gyro’s superior algorithm, the gain control options can be configured to a comfortable or more sensitive sense of control depending on your preference.

    Specifications:
    1. Voltage Range：5-6V DC. (Do not use dry cell batteries!)
    2. Dimensions：40mm x 25mm.
    3. Weight：6.5g.

    Package Includes:
    1. NX3 3-Axis Gyro
    2. NX3 Manual
    3. Servo Wire Set (5 pcs)
    4. Double-sided Mounting Tape

    Recommended Use of a Transmitter with a 3-way Toggle Switch (Not Necessary)

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Microzone M-200 Smart Touch Professional Intelligent Charging System w/ AC Power Supply Wall Adaptor for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Introducing one of the most powerful yet easiest to use 200W/10A charging system ever! The Microzone M-200 packs the most advanced charging, discharging, maintenance controls into one small attractive and powerful unit! Gone are the days of pressing individual buttons to scroll through tough to read and confusing program menus. The M-200 uses a Touch Sensitive 3.5” Color LCD Screen which allows you to quickly switch from screen to screen to individually set your charging or discharging parameters! Color coded menus and easy to read letters! Extremely easy to use as you set your charger for your specific charging parameters! Included is a Balancing Paraboard with Four (4) XT60 and T Style battery connectors/Type XH balance plug ports! This system allows the capability to charge up to 4 lipos at the same time! (Please see detailed information for paraboard charging). Twin cooling fans keep the M-200 performing efficiently and quietly. Up to 200 Watts of output power and 10AMPS! Charge fast and charge with safe while the M-200 internal Microprocessor constantly monitors the battery level and individual cell voltage! Time to give your batteries a next level charging experience!

  • Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Microzone 6 Channel 2.4GHz MC-6C Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-6C is the perfect radio system for the beginner to the sport flyer that just wants to go flying with no programming! A full function 6 Channel System with easy to set up servo reversing and model type right from the transmitter face using ‘Easy Switches’! The MC-6C is perfect for your gliders, warbirds, and even EDF Jets! This is the best choice for getting into RC flying! Great price and even better performance!

  • Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Microzone 7 Channel 2.4GHz MC-E7S Gyro Stabilized Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    The MC-E7S is one awesome radio system with included ‘Stable Fly’ E7RE Gyro Stabilized Receiver System! Great for the beginner to the sport flyer to the advanced pilot! The E7RE receiver is a small powerful unit with a Gyro built in! This flight stabilization system is perfect for the novice pilot! The 3-position switch on the transmitter allows to switch between Manual Mode, Auto Mode and Sport Mode! In Manual Mode, the Gyro Stabilization is turned OFF. In Auto Mode (Amazing Mode) is the BEST mode for beginner pilots featuring ‘Auto Leveling’! The system will not allow the aircraft to roll or loop inverted and will automatically level out the aircraft when the transmitter sticks are released! Sports mode gives you all the benefits of Auto Leveling with the ability to perform aerobatics while the Gyro constantly monitors and corrects for a smooth flying experience! The MC-E7S is great for gliders, warbirds, and EDF Jets! Gyro Stabilization flight experience is the next level of RC and with the Microzone MC-E7S, fly with confidence!

  • Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet Microzone 8 Channel 2.4GHz MC-8B Programmable Radio Transmitter System Set for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    Introducing the Microzone MC Series 2.4GHz Radio Systems! The MC Series offers great performance, excellent range and reliability! The Microprocessor constantly scans for the best available channel to provide a care free flying experience without any transmission issues! It is not necessary to wait for other people while they are flying as the MC Series will always scan and choose the strongest signal channel for you automatically. You can fly with 1 or 50 of your friends at the same time without any interference! Built with quality and comfort the MC series feels great in the hand with “Fluid Feel” stick gimbals! The 1024 signal transmit rate means the instant you give your stick-input, your aircraft is responding! Microzone MC Series gives you more flying time and less worrying time! Fly safe, Fly fun and Fly in style!

    Introducing the Microzone MC-8B! This stylish 8 Channel radio system packs one powerful Microprocessor! The MC-8B gives you a full 8 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-8B 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-8B has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-8B can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 1024 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. Take your RC experience to the next level and in style with reliability and performance with the MC-8B!

  • BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet BlitzRCWorks Li-Po Guard/Safety Charging Bag (220x100x75mm) for Taft Hobby 6 CH Red Super Scorpion 90mm RC EDF Jet

    This BlitzRCWorks Li-Po Guard is made from high quality fiberglass woven fabric that is similar to fireproof suits worn by firefighters and is made of a space age fire proof material that is immune to any flame or battery malfunctions! With the way Li-Po batteries are charged and discharged, these batteries have proven to be unstable and dangerous when charging. This guard bag provides a safe and fire-proof enviroment for your batteries. Simply insert batteries into bag during your charge process and let it charge. This bag can be used to charge and store your batteries.

Taft Hobby 6 CH Cobra 90mm RC EDF Jet Parts

  • BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet BlitzRCWorks Silver Aluminum CNC Model Airplane Stand(Silver Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Cobra 90mm RC EDF Jet Zap Zap-O Xtra PT25X Foam Safe CA Glue for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PT-28).

    Features:

    • Odorless formula
    • Medium gap filling viscosity
    • Works on styrofoam and foam without primer
    • Works on balsa, plywood & other materials as well

  • Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Cobra 90mm RC EDF Jet Imax B6AC+ V2 Pro Power Intelligent Digital Mutifunctional High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    This charger contains a voltage balancer for Li-Po batteries and has an individual cell-voltage balancer. This eliminates the need to check for cell balancing on a separate balancer.

    If charging capacity exceeds the limit, the process will be automatically terminated when a maximum value has been set.

    The temperature of a battery that is charging will rise because of its internal chemical reaction. By setting the limit of the temperature, the process will be forcibly turned off when the limit has reached.

    To prevent damage to the car battery that is being used as a power source for charging, the voltage of the battery will always be monitored. If it drops below the limit, the charging process will automatically end.

    This charger employs the circuit that has a maximum output power of 200W (50W each channel). As result, it can charge or discharge up to 15 cells of Ni-CD/Ni-MH and a series of Li-Po batteries with a maximum current of 5.0A

  • BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet BlitzRCWorks Blue Aluminum CNC Model Airplane Stand(Blue Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    The BlitzRCworks Model Stands Are a "must have" item for anyones hangar! Available beautifully finished in 4 colors these model stands are constructed from a combination of high quality CNC machined billet aluminum components, and high quality Extruded Aluminum tubing. Each of the stands features a pair of precision machined "dog-tooth" interlocking billet discs thst clamp together to securely position the stand at various working heights. The main stand itself is comprised of high quality "D section" extruded aluminum main uprights with an extruded aluminum tube at 90° to the upright attached with the included Billet Aluminum connecting parts and capscrews. The top of each upright features a closed cell foam covered Aluminum Bar which has been shaped to ensure perfect support of your most prized aircraft.

  • Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Cobra 90mm RC EDF Jet Microzone 10 Channel 2.4GHz MC-10 Programmable Radio Transmitter System Set for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    Introducing the Microzone MC-10! This stylish 10 Channel radio system packs one powerful Microprocessor! The MC-10 gives you a full 10 Channel to use on just about any aircraft, sailplane, drone, or helicopter! The bright daylight viewable LCD Backlit Display allows for easy to program and fine tune parameters such as Dual Rates, Exponential, End Point Adjustments, Throttle Curve, Flight Timers and more! The most impressive is the MC-10 10 Model Memory! You can purchase up to 9 additional receivers and this single transmitter gives you the ability to switch from model to model by the press of a button! That’s right! The MC-10 has a 10 Model Memory Data Base! The Microprocessor will store and remember each model settings you program individually! This is still a great radio system for the beginner because of its easy to program and fly systems! However, if you are a seasoned pilot, the MC-10 can meet all your needs from sport flying, to multi-channel warbirds and EDF JETS! This will also be a great radio for Drones and Drone racing! The ability to fine tune each control surface individually meets the needs of the most advanced aircraft’s! Aluminum anodized gimbal ends and super smooth gimbals transfers the 2048 lightning fast response rate from your fingers to your aircraft instantly! The rotary dials allow for 2 channels of fluid linear controls to any dial settings you program. This MC-10 supports 3 variety of batteries (4x AA batteries / 2S li-po / 3S li-po battery). Take your RC experience to the next level and in style with reliability and performance with the MC-10!

  • Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Cobra 90mm RC EDF Jet Digital Battery Capacity Checker Tester for Li-Po/LiFe/Li-ion/NiMH/NiCd Batteries for Taft Hobby 6 CH Cobra 90mm RC EDF Jet

    Digital Battery Capacity Checker Tester for LiPo/LiFe/Li-ion/NiMH/NiCd

  • BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet BlitzRCWorks Red Aluminum CNC Model Airplane Stand(Red Anodized) for Taft Hobby 6 CH Cobra 90mm RC EDF Jet