|
The X8R is in a Smaller package than previous 8 channel receivers but has so much more capability. The new SmartPort supports the new hub-less sensors as well as the older hub analog sensors.The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second.The X8 protocol is also backward compatible! In D8 mode it works with the DHT, DJT, DFT and DHT-U transmitter modules.
|
- More channels — 16 Channels (1-8 are available from conventional channel outputs, channels 1-16 from the SBUS port, or you can combine two X8R receivers to create a 16-channel receiver)
- Connect two X8R receivers in parallel to create a 16-channel receiver
- Featuring RSSI PWM output (0-3.3V)
- SmartPort enabled, allowing two-way full duplex transmission
|
|
- FrSky 2.4GHz X8R Telemetry Receiver
- 2x Short Tools
- FrSky X8R Manual (Click to View)
|
| Frequency | 2.4GHz |
| Dimension | 46.5mm x 27mm x 14.4mm (1.83" x 1.06" x .56") |
| Weight | 16.8g (0.59 oz) |
| Number of Channels | 16CH (1-8 are available from conventional channel outputs, channels 1-16 from the SBUS port, or you can combine two X8R receivers to create a 16-channel receiver) |
| Operating Voltage | 4V-10.0V |
| Operating Current | 100mA@5V |
| Operating Range | >1.5km (Full range) |
| Compatibility | - All Tandem and Twin transmitters
- All 16 channels require the FrSky Taranis, or the XJT module bound in D16 mode
- For 8 channels in D8 Mode, you can use the FrSky Taranis or the XJT, DJT, DFT, DHT, and DHT-U modules
|
|
