POWER FOR EVERYTHING AND FOR EACH TYPE OF RC AIRPLANE
Ground-breaking 3-axis stabilization system. Gyro CORTEX has a high-quality, is reliable and universal. Whether a Parkflyer, 3D Acro model or turbine jet, this gyro fits every RC aircraft. 100% reliable sensors. The latest soft-ware algorithms. Everything in more remarkably small and CNC-milled aluminium housing. Together, these features bring the gyro to a whole new level. And they will do the same for your RC airplane. Whatever you do, you will notice the difference - your remote controlled airplane is in the air, starting and landing work perfectly and strong or gusty winds are no longer a problem.
IMMEDIATELY 'READY TO RUN', SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT
The Cortex does not require any PC or additional software settings - unless it is desired. You do not want to wait too long and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier.
COMPATIBLE, UNIVERSAL, STRONG, THE VERSATILITY LEAVES NOTHING TO BE DESIRED
The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed in the Internet at any time.
SCOPE OF DELIVERY & GADGETS, GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES
Get to know the carefree demonic satisfaction of flying with a BavarianDEMON. With emphasis placed on "carefree". Is equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Operating instructions and PC software are available for download under the "Service" heading at Software / Firmware and Manuals / Data Sheets. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".
The CORTEX - AIRCRAFT 3-axis stabilization system for fixed wing model aircraft. Extremely smooth flight characteristics - even in strong and gusty wind.
- Approved 3-axis stabilization technology: Made in Germany (ISO 9001)
- Immediately Ready-to-Run: Quick setup via radio, no computer necessary
- Additional tuning options: via USB cable and PC or laptop
- Enhanced compatibility: Supports up to 5 independent servo channels
- Universal application: no matter if Parkflyer, 3D acro model or turbine jet
- Enhanced versatility: compatible with numerous serial receiver protocols (Futaba S.BUS (input), up to 2 Spektrum/JR satellites and all PPM serial signals like with Jeti, Graupner, etc.)
- Future-proof due to online updates: Free software & firmware available
|Dimensions||36 x 34 x 14mm|
|Supply Voltage||4-10V (2s LiPo Compatible; Minimum 5.5V when using Spektrum or JR Satellites)|
|Temperature Range||-15˚C…+55˚C, 5˚F…130˚F|
|Max. Turn Rate||500˚/s on all axis|
|Switching Servo Rate (PC software)||Can be selected digital (220Hz)/analogue (55Hz) |
|Servo Power Max||Total 12A (permanent load 15A, short-term)|
|Weight||18g (without cable harness)|