The BlitzRCworks VTOL V-22 Osprey is the culmination of 3 years development time combined with recent advances in Flight controller technology. Available in four different colour schemes it comes with a low part count and minimal gluing so you can be flying as soon as the glue dries! It is equipped with a 4S/14.8v 3 point propulsion system comprised of a pair of 800kv main rotor motors and a2600kv lift fan motor all controlled by the 5 channel onboard flight controller to ensure level flight, perfect stability when hovering, and seamless transitions from VTOL configuration to that of regular fixed wing flight (just like the real V-22 Osprey).Nacelle Rotation and transition from VTOL to fixed wing flight configuration is easily handled by the Flight Controller with a pair of metal geared 17 Gram Servo’s (one per Nacelle) and a 9 Gram metal gear servo taking care of each aileron and also looking after Elevator Duties at the rear. If you are looking for something different that is also fun to take to the field or the local park then the V22 Osprey from BlitzRCworks could be just for you!

• Full 5 channel control (Aileron, Elevator, Throttle, Rudder, Flight mode transition)
• High precision 5 channel flight controller providing stable and precise transition between flight modes
• Low part count and simple assembly with minimal gluing-Be flying in less than an hour
• High quality EPO Foam construction with Spacious battery compartment
• 17 Gram Metal geared Nacelle Tilt Servo’s, and 9 Gram Metal geared Elevator and Aileron servo’s
• Detachable main wing and landing gear
• 4S power system with wide battery size range (2200-3200mAh)
• 4 popular Colour Schemes-Tactic Gray, Arctic Camo, Military Gray, U.S.Coastguard white/Red

• Airplane (most components preinstalled, some assembly required)
• User manual

• 5 channel transmitter and receiver (not included)
• 4S Li-Po battery balance charger (not included)
• 14.8V 2200~2800mAh Li-Po battery (not included)

This packaging option indicates what comes included and does not mean a completely assembled item. Most onboard electronic components are pre-assembled out of the box though some assembly is still required. This packaging option does not include the radio system, battery or charger, unless noted otherwise.

The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.

ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with a KIT such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.

PNP indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.

RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package.