Aeroplus RC brings you World's First All Wood built up 60" Laser 260 in a True PNP Package! Aeroplus RC provides extremely high quality ARF's from 60" to 120cc! We have taken the guess work out of electronics combination in building an ARF! This Laser 260 comes 98% assembled right out of the box! High quality digital metal gear servos, 5050-500kv brushless outrunner motor, 80AMP ESC, pushrods, control surface arms all installed and centered! Your only assemble is the horizontal stabilizer and screw on the carbon fiber landing gear! This Laser260 is not only good looking, she is a great aerobatic platform for all your 3D maneuvers! You can of course dial down the control surface throws and shes a great sport flier! Super high quality and attention to detail on this Laser. Carbon fiber reinforced fuselage, high quality covering keeps this aircraft strong and light! Battery can be 6s 3300 to 5000mah depending on your flying style. This power combo provides extremely high power and unlimited vertical performance! Our team pilot Pete uses 3300mAH for great overall performance! Included are extra long fiberglass servo arms and main wing bag.
|
- 4 operable channels (aileron, elevator, throttle, rudder)
- Super easy assembly, 98% preassembled right out of the box
- All wood construction
- Large battery compartment for many battery options and setup configurations (fits 3300~5000mAh)
- Constructed of light precise laser cut wood
- Excellent 3D aerobatic performance
- Carbon fiber wing tube, main gear, and tail gear
- Carbon fiber spinner
- Carbon reinforced landing gear mount
- Carbon fiber rods for stronger fuse
- Fiberglass servo arms and control horns
|
LASER 260 60" World's First Wood PNP!
Flying Skill Level: Great for beginner to intermediate and skilled pilots of all ages. Extended Flight simulator practice and experienced pilot supervision recommended.
Build Level: Minimal airplane assembly required. Less than 1 hour to begin flying (excluding battery charging time). Please dry fit and test all electronics before gluing components and assembly.
Maintenance Level: After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection.
- Airplane (most components preinstalled, some assembly required)
- User manual
|
- 4 channel transmitter and receiver (not included)
- Battery balance charger and power supply (not included)
- 6S 3300~5000mAh (not included)
|
This packaging option indicates what comes included and does not mean a completely assembled item. Most on-board electronic components are pre-assembled out of the box though some assembly is still required. This packaging option includes a radio system, Battery and charger, unless noted otherwise. |
What's the difference between RTF, ARF, and KIT? |
The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.
KIT indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with a KIT such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.
ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.
RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package. |
Wingspan | 1524mm (60 inch) |
Length | 1460mm (57.5 inch) |
Wing Area | 39.2sq dm (607.6sq in) |
Flying Weight | Approx 2300g (5 lb) |
Motor | 5050-500kv brushless outrunner |
Speed Controller | 80A brushless ESC w/ 5A UBEC |
Servo | Four 25g metal gear servos |
Propeller | 15 x 5.5 |
|