After the successful introduction of Aerofoam MB339, and L39 “real turbine” foam jets, we at Global Jet Club have just finished extensive tests and validation of the latest addition to our Global Aerofoam Jet line up: the "Global Aerofoam T-45".
This T-45 Goshawk is a 1/6.25 scale turbine jets designed for 60-80 size turbine. With a wingspan of over 59 inches and fuselage length over 75 inches, this is by far the largest turbine powered foam jet in the market today. With its size, the wing load is really light even after we add the scale details such as slats/flaps, airbrake, tail hook, navigation lights, full moving stab to name a few. These scale details and light wind loading make it a perfect scale trainer jet just like its full size sibling.
This scale jets can be fully decked out for serious scale competition. It comes installed and truly functional.
Leading edge slats – Operated by 4 pre-installed digital high voltage servos
Speed Brakes – Operated by 2 pre-installed digital high voltage servos
Fully hinged offset flaps designed to work with slats for balanced Center of Lift and Drag, just like the full scale
Vortex generators on the wings
Full moving stabilizer – Yes, full stab controlled by a high torque digital servos
Navigation lights – Installed
Scale landing gear – electric retract system with electric brakes with scale struts, catapult hooks, gear doors, inflatable wheels fully installed
Tailhook with pinto point – ready for adding retractable mechanism for scale carrier landing approach
Built in 3S dual input redundancy voltage regulator and power distribution system – UBEC with selectable output (5-6V for servos), 7.4-8.4V for brake and retract system
UAT, massive 1.6L tanks (2) included. They can be linked for extended flight time (10-12 minutes flight time tested with an ACEx80 turbine engine) or one for ACEx smoke system
Exhaust Pipe installed
Global Aerofoam T-45 Goshawk Turbine Ready Jet Flight Overview
Airplane (most components preinstalled, some assembly required)