- Limited 1 year warranty
We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of purchase
- Charge up to 4 batteries simultaneously
- Optimized operating softwareThe T6X4 320W multi charger features an AUTO function that sets the feeding current during the process of charging or discharging. It can prevent overcharging which may be dangerous to the battery or user. It will disconnect the circuit automatically and sound an alarm once it determines malfunction. All the programs of this charger are controlled through two way communications between user and software. It achieves maximum safety while minimizing confusion. These settings can also be fully configured by the user
- Internal independent lithium battery balancerThe T6X4 320W multi charger employs an individual cell voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
- Balancing individual cells during dischargingDuring the process of discharging, the T6X4 320W multi charger can monitor and balance each cell of the battery individually. If any abnormal voltages are detected the charger will sound the alarm and end its charging process.
- Adaptable to various type of lithium Cells The T6X4 320W multi charger is adaptable to various types of lithium batteries such as Li-Ion, Li-Po, and Li-Fe cells.
- Fast and storage mode of lithium batteriesThe T6X4 320W multi charger has the ability to fast charge and reduce the time required to charge a battery. The storage function can regulate the final voltage of the lithium battery required for optimal storage conditions to prolong battery life.
- Maximum safetyDelta-peak sensitivity features allow the charger to detect peak voltage threshold and terminate the charging process for safety.
- Automatic charging current limit Ability to set the upper limit of the charging current when charging Nickel battery variants. It is useful for Ni-Mh batteries of low impedance and capacity in the auto charging mode.
- Capacity limit The charging capacity is calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically for the set maximum value.
- Temperature Threshold The batteries internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the charging process will be terminated. *This function required a temperature probe which is sold separately.
- Cyclic charging/discharging 1 – 5 cycles of continuous charge > discharge or discharge > charge is selectable for battery refreshing and balancing to stimulate battery function.
- Data Store/load 5 batteries charge or discharge details can be stored for user convenience.
|
- Thunder T6X4 320Watt 20Amp Intelligent Digital Mutifunctional High-Performce Rapid Quad Charger
- (1) Alligator clip charge lead
- (1) JST charge lead
- (2) Battery clamp
- (2) XH type li-po balance board
- (1) Tamiya charge lead
- (1) HXT 4mm charge lead
- (1) Receiver battery charge lead
- (1) RC car glow plug igniter charge lead
- (1) HXT 4mm to male T connector
- (1) HXT 4mm to female T connector
- User manual
|
- DC power 11 ~ 18 volt power supply (not included)
|
| Length | 229mm (9 inch) |
| Width | 159mm (6.25 inch) |
| Height | 64mm (2.5 inch) |
| Weight | 1134g (40 oz) |
| DC Input Voltage Range | DC 11 ~ 18V |
| Charge Current Range | 0.1 - 6.0A x4 |
| Discharge Current Range | 0.1 - 2.0A x4 |
| Charge Power Limit | 80W x4 |
| Discharge Power Limit | 8W x4 |
| Balance Current | Max. 300mA |
| Lithium Battery Cell Count | 1 - 6 Cells |
| NiCd/NiMH Cell Count | 1 - 15 Cells |
| Pb Battery Voltage | 2 ~ 20V |
| Battery Data Storage | Up to 5 batteries |
| Charging/Discharging Cycle | 1 - 5 continuous charge/discharge |
|
