• Voltage: 11.1v
• Capacity: 1800mAh
• Discharge Rate: 10C
• Dimension: 70mm X 32mm X 28mm
• Weight:  131.8g
• Wire Gauge: JST and Balance BNC, 3S1P

Warning/Attention:

• Charging Lithium Polymer batteries with incorrect charger WILL CAUSE FIRE, AND EXPLOSION.
• Please make sure your charger supports charging Lithium Polymer batteries.
• If you do not have an appropriate charger, please order one HERE
• We are NOT responsible for any damage CAUSE by incorrect charging of Lithium Polymer.
• NEVER charge Lithium Polymer batteries with a charger designed for NiCd, NiMH, or any other type of battery chemistry. use ONLY the chargers listed under REQUIRES or equivalent substitutes.
• Do not allow LiPo cells to overheat at any time. Cells which reach greater than 140?Fahrenheit (60C) will ually become damaged and could catch fire.
• Do not charge LiPo cells on or near combtible materials including paper, plastic, carpets, vinyl, leather, wood, inside an R/C model or full size automobile.
• Do not discharge, doing so will damage the pack.
• Do not expose LiPo cells to water or moisture at any time.
• Do not store batteries near an open flame or heater.
• Do not assemble LiPo cells or pre-assembled packs together with other LiPo cells or packs.
• Do not leave a LiPo battery unattended during charging or discharging.
• Always store LiPo batteries in a secure location away from children
• Always remove a LiPo battery if model is involved in any kind of crash. Carusefully inspect the battery and connectors for even the smallest damage. CAUTION: cells may be hot!
• Do not allow the electrolyte to get into eyes or on skin. Wash affected areas immediately if they come into contact with electrolyte. Do not alter or modify connectors or wires of a Lithium battery pack.