Available Package Options
Available in 2 power setups(6S or 8S) and 4 colors(Blue, Blue Camo, Gray Camo, and Gray), this Brand New J-10 Version 2.1 (New Rubber Wheels, Improved Servo Locations, New Metal Geared Servos With Metal Casing, New Battery Location For Better Performance, and Free Set Of Fixed Landing Gear System) is a formidable multi-role fighter boasting exceptional agility and maneuverability,
characteristics which have been faithfully reproduced in this scale model. As part of the effort in achieving this, the J-10 was designed to run a 105mm
EDF supplied by a 120A custom HobbyWing ESC specific to the J-10. The EDF unit and housing are constructed using a nylon composite material due
to the material’s optimal strength to weight ratio, and the custom HobbyWing ESC is wired to provide a direct line of power to the PCBs controlling
sub systems such as the retracts, navigation lights, and gear doors instead of through the receiver as is done predominantly. The J-10’s control surfaces
are all powered by 12g metal gear digital servos, with the exception of the canards which contribute heavily to the J-10’s maneuverability, they are
instead powered by a larger 40g metal gear digital servo.
In our trials the J-10 pushed pass the 100mph mark fully stock with a 6 cell 5000mah, achieving a max clocked speed of 105mph. For speed demons, there’s more speed yet to be squeezed out from the J-10 with an 8S power setup. She
handles extremely well, though with a voracious appetite, the 5000mah battery lasted us no more than 2 ½ - 3 minutes of flight time, but it was
intense while it lasted, the speed and agility of this jet was simply amazing.
The plane uses AS150 Anti Spark 7mm plugs to connect to the battery. When you purchase the battery for this J-10 from
BananaHobby as a completion option, we will be supplying high quality Li-Po batteries pre-soldered with AS150 Anti Spark 7mm connecters. However, If you elect to purchase a battery not from the "Completion Option" of this product page, please note, you will need an adapter to convert that to the AS150 Anti Spark 7mm connecters.
Air Epic J-10 J-10 Flight Demonstration Sneak Peak by RCInformer
Air Epic J-10 Setup Guide by RCInformer
Air Epic J-10 J-10 Control Surface Demo by RCInformer
Air Epic J-10 J-10 Retract System Demo by RCInformer
Flying Skill Level:Great for beginner to intermediate and skilled pilots of all ages. Extended Flight simulator practice and experienced pilot supervision recommended.
Build Level:Moderate airplane assembly required. Internal wiring and electronics configuration is required. Please dry fit and test all electronics before gluing and securing any components.
Maintenance Level:After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection.
This packaging option indicates what comes included and does not mean a completely assembled item. Most onboard electronic components are pre-assembled out of the box though some assembly is still required. This packaging option does not include the radio system, battery or charger, unless noted otherwise.
The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.
KIT indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with a KIT such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.
ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.
RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package.
Copyright © Banana Hobby, All rights reserved. All prices and specifications are subject to change without notice. Banana Hobby is not responsible for typographical errors. All typographical errors are subject to correction.