Available Package Options
The All New Air Epic 90mm Viper now available in 2 power configurations (6S or 8S battery) and in 5 colors! (Green, Red, Yellow, Brown, Snake), this 90mm Viper Jet was bred purely as a sports jet and it definitely shows in its handling. Capable of reaching speeds above 100mph, it can perform high speed passes from quarter to full throttle with ease, and of course all the loops, spins, dives, and banks you want, this speedster packs a lot of power and potential in one lean package. The 90mm EDF unit that powers it is equipped with an 11 blade fan which provides all the necessary thrust and then some for all its speed and acrobatic ability. We recommend using a 22.2V 6S 4000+mAh Li-Po battery for 6S Setup and 29.6V 6S 4000+mAh Li-Po battery for 8S Setup for best performance.
Viper Jet EDF Preview in HD!
Flying Skill Level:Great for beginner to intermediate and skilled pilots of all ages. Extended Flight simulator practice and experienced pilot supervision recommended.
Build Level:Moderate airplane assembly required. Internal wiring and electronics configuration is required. Please dry fit and test all electronics before gluing and securing any components.
Maintenance Level:After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection.
This packaging option indicates what comes included and does not mean a completely assembled item. Most onboard electronic components are pre-assembled out of the box though some assembly is still required. This packaging option does not include the radio system, battery or charger, unless noted otherwise.
The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.
KIT indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with a KIT such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.
ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.
RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package.
Copyright © Banana Hobby, All rights reserved. All prices and specifications are subject to change without notice. Banana Hobby is not responsible for typographical errors. All typographical errors are subject to correction.