- 4 operable channels (Aileron, Elevator, Throttle, retracts)
- Full aerobatic characteristics: inside loops, outside loops, axial rolls, inverted flight, stall turns, hammerheads, and spins are all possible
- Steerable nose gear
- Metal gear retract servos
- Carbon main spars
- 90mm composite fan with metal spinner
- 100AMP brushless ESC with BEC
- Color schemes: Tiger Meet, Blue Angel, Jolly Roger, Grey, and Camo
|
Maintenance Level:
After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection.
- Airplane (most components preinstalled, some assembly required)
- User manual
|
- 4 channel transmitter and receiver (not included)
- 6S Battery and charger (not included)
- 22.2V 6S 25C 3700mAh Li-Po battery (not included)
|
| Wingspan | 920mm (36.2 inch) |
| Overall Length | 1399mm (55 inch) |
| Flying Weight | Approx 2000g (70.5 oz) |
| Wing Load | 90g/ dm? |
| Drive System | Powerful Brushless Inrunner motor with 90mm electric ducted fans |
| Servo | 7pcs servo (3 Metal Gear Servos for Retracts) |
| ESC | 100A Brushless Speed Controller |
| Battery | 22.2 Volt 3700mAhcell 25C Lithium Polymer Battery |
| Control System | 2.4GHz multifunctional transmitter and receiver |
| Radio Control Range | 3000 feet (900m) |
| Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating | |
