6 CH
Available Package Options
The 90mm Viper Jet was bred purely as a sports jet and it definitely shows in its handling. Capable of reaching speeds above 100mph, it can perform high speed passes from quarter to full throttle with ease, and of course all the loops, spins, dives, and banks you want, this speedster packs a lot of power and potential in one lean package. The 90mm EDF unit that powers it is equipped with an 11 blade fan which provides all the necessary thrust and then some for all its speed and acrobatic ability. Feeding the 90mm EDF is an 80 amp ESC, we recommend using a 22.2V 6S 5000mAh Li-Po battery for this unit to get the most out of the unit.
Viper Jet EDF Preview in HD!
Build Level:Moderate airplane assembly required. Internal wiring and electronics configuration is required. Please dry fit and test all electronics before gluing and securing any components.
Maintenance Level:After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for soild connection.