- 4 operable channels (aileron, elevator, throttle, rudder)
- 2.4GHz spectrum technology with the functions of automatic identification and precise code pairing, and strong anti-jamming that allow more than 20 aircrafts to fly in the same field at same time
- Simple and easy to assemble
- Constructed of durable EPO flex foam
- Detailed cockpit design
|
|
Freewing Flight Design RC Flight Review in HD!
Flying Skill Level:
Excellent for beginners and pilots of all skill levels. No previous experience necessary. Flight simulator or experienced pilot supervision recommended for beginner pilots.
Build Level:
Minimal airplane assembly required. Less than 1 hour to begin flying (excluding battery charging time). Please dry fit and test all electronics before gluing components and assembly.
Maintenance Level:
After every 10 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevises to insure no cracks are visible and no clevis is loose. Make sure transmitter batteries are always fresh and or in new condition.
- Airplane (most components preinstalled, some assembly required)
- 2x Pilot Figures
- 4 channel 2.4GHz multifunctional radio transmitter (Radio system brands may vary)
- Rechargeable 11.1V 1600mAh 25C Li-Polymer Battery
- Battery balance charger with alligator clips (optional wall adapter sold separately)
- User manual
|
|
| Wingspan | 1200mm (47.2 inch) |
| Length | 900mm (35.4 inch) |
| Flying Weight | 1100g (38.8 oz) |
| Drive System | 3510 KV1000 brushless outrunner motor |
| Propeller | 3-blade |
| Speed Controller | 30A Brushless ESC |
| Servo | 5X 9g |
| Battery | 11.1V 1600mAh 25C Li-Po |
| Control System | 2.4GHz multifunctional transmitter and receiver |
| Radio Control Range | 3000 feet (1000m) |
| Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating |
|
