New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caused by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club’s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. Finally, 2.4 Gigahertz equipment use less current to operate than standard frequency systems. This results in longer flight time and longer life of your transmitter and receiver batteries!

• New 6 channel 2.4Ghz Transmitter with PIT and PLT mode lock switch, adjustable knob , rudder mixing, throttle curve, servo exponential function, rudder exponential functions, and multistage electricity volume show on the panel
• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• Brand new design for the structure
• NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• The design of metal tail, metal swash plate and metal rotor head is of legerity, innovation, precise and stable
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Powerful brushless main motor
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• CCPM mode with adjustable pitch system and 3D conversion
• Autorotation landing protection
• One-way bearing and landing system with flameout function
• Tail rotor driven by belt transmission system provide stable flight and low noise
• Mode lock switch to free lock the parameters of PIT & PLT
• Main rotor driven by powerful Brushless Motor and tail rotor driven by belt transmission system
• NO TAIL Motor - Tail Rotor driven by belt transmission system with Servo Controlled Rudder like Gas-Helicopter
• No need to worry about burning tail motors
• Tail blade adopt flameout landing system
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• Improved blades give superior lift
• Perfect for people who wants to move up from 4ch helicopter
• PCM receiving and transmitting system increases the operation stability
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Almost Unbreakable Rotor Head
• High quality individual headlock tail gyro
• Provide excellent performance outdoor and indoor
• Easy to fly and more stable lifting
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Metal ball swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Stadium
• Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality Fiber Glass materials, which is not easily break
• Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available.
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Main Rotor Diameter: 622mm (24.5 inch)
• Overall Length: 590mm (23.2 inch)
• Flying Weight: 628g (22.2 oz)
• Driven system: Brushless Motor WK-WS-26-001
• Gyro: WK-G011
• Servo: 4x 9.1g (speed 0.12sec/60o(4.8V) / torque 1.1kg/cm (4.8V) / dimension 22.5*11.8*27mm)
• Rudder Servo: 1x 6.4g (speed 0.09sec/60o(4.8V) / torque 0.6kg/cm (4.8V) / dimension 21.5*11.8*21.7mm)
• Battery: 11.1V 1500 mAh Li-polymer
• Control system: 6CH Multifunctional 2.4 GHz Transmitter WK-2601 and 4-in-1 Receiver RX-2701
• Radio Control Range: 2500 feet (762m)

• Helicopter (100% Assembled) w/ Carbon Fiber Glass Blades
• 6 Channel Multifunctional 2.4GHz R/C Transmitter
• Wall Battery Balance Charger (GA-003)
• High Quality 11.1V 1500mAh Li-Polymer Rechargeable Battery
• English Manual