The latest ESky Belt-CP V2 is an upgrade version of the world famousus ESky Belt-CP RC helicopter. With totally fresh apperance and new designs for the main rotor and tail rotor systems, the Belt-CP V2 increases the stability, powerful and accuracy of the helicopter as well as to give more direct control by the pilot.

• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• Brand New 6 channel PPM/CCPM Transmitter EK2-0406F with PIT and PLT mode lock switch and adjustable knob
• Completely assembled and tested at the factory, ready to fly out box!
• 120 degree ECCPM Control System
• New High performance Heading Lock gyro EK2-0704B is Capable of sport flying and 3D aerobatics
• Stainless steel flybar, main shaft and tail shaft
• New and Improved Body Frame(Strong & Light)
• New quick responsive 7.5g EK2-0508 digital micro servos
• High performance 3800KV Brushless Motor used as the main drive
• Powerful 11.1V 1800mAh 20C high capacitance Li-Po battery provide enough power for any aerobatic flight
• High Inertial Main Blade and High Efficiency Tail Blade
• High Rigidity Iron Main Shaft
• High Rigidity Aluminum Tail Boom
• Super Iron Landing Skids
• High Strength Carbon Fiber Tail Boom Support Set
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• Perfect for people who wants to move up from 4CH helicopter
• Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
• CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• O-ring inside the center hub reduce oscillation of main blades
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Hard, Light weight Main Blades
• Brand new design for the structure
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Tail rotor driven by belt provide stable flight and low noise
• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
• No need to worry about burning tail motors
• Light and hardened wood blades provide great lift, only weight 11g
• Outer placed professional gyro
• With length-adjustable servo push-rod, precision sub trim can be easily set
• Extended tail boom, reduced the load of tail motor
• Separate main shaft and main gear reduce repair time and noise
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Almost Unbreakable Rotor Head
• Easy to fly and more stable lifting
• PCM receiving and transmitting system increases the operation stability
• CCPM mode with adjustable pitch system and 3D conversion
• Provide excellent performance outdoor and indoor
• Tail blade adopt flameout landing system
• Metal ball swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Stadium
• Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality wood materials, which is extremely light and not easily break
• Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter also included)
• Professional Lifetime Tech Support only at Banana Hobby

• Main Rotor Diameter: 680mm (27 inch )
• Tail Rotor Diameter: 130mm (5 inch)
  
• Length: 640mm (25 inch)
• Height: 230mm (9 inch)
• Flying Weight: 670g (24 oz)
• Main Gear: 10 teeth
• Main Driven Gear: 140 teeth
• Tail Driven Gear: 110 teeth
• Driven Gear Ratio: 14:1:5
• Drive System: 3800KV Brushless motor (EK5-0006)
• Servo: 4x quick responsive 7.5g micro servos (EK2-0508)
• Gyro: Esky Professional Head Lock Gyro (EK2-0704B)
• Speed Controller: 25A Brushless ESC (EK1-0350)
• Battery: 11.1V 1800mah 20C 3-Cell Li-Polymer (EK1-0186)
• Control system: 6CH CCPM Multifunctional FM Transmitter EK2-0406F and Receiver EK2-0420A
• Radio Control Range: 2500 feet (762m)

• Helicopter (100% Assembled)
• New 6 Channel PPM/CCPM Multifunctional FM R/C Transmitter EK2-0406F (8 AA batteries included)
• 100-240V Wall Battery Balance Charger with Auto Cut-Off
• 11.1V 1800mah 20C 3-Cell Li-Polymer Rechargeable Battery
• Optional: Esky Belt-CP Genuine Aluminum Carrying Case
• English Manual