This helicopter is well trimmed and 100% test flown at the factory. The PIGEON 450M1 is based on the T-Rex Superior Edition. Designed for the pilot who wants to be unique but still demands quality and precision. Designed for the advanced helicopter with quality CNC machining. For the most part are compatible with the popular Trex 450 electric helicopter. All the hardware is high grade with high quality bearings. Unique, quality, precision control and high compatability for owners of existing T-Rex Helis is what one can expect from the PIGEON 450M1.

This is an 100% Ready-To-Fly RC Helicopter w/ Brushless Motor, Brushless ESC, Carbon Fiber Main Blades, Li-Po Battery, and Aluminum Carrying Case. The PIGEON 450M1 is a step up from the common Micro Electric Helicopter. Being physically larger, it handles more consistently and is more stable in conditions that would normally ground a micro. Unlike other 450 pl electric helicopters which retail at premium pricing, the PIGEON 450M1 will work running the same servos, gyros, receiver, speed controller and batteries (2200mah 11.1V or 14.8) as the micros. This gives it the edge in both affordability and performance. And for the pilot trying to push the limits, running the PIGEON 450M1 on 4-cell LiPo will deliver extreme 3D capable performance. This is sure to impress all your friends and other RC enthiasts.

• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
• Full CNC rotor head and tail with Carbon Fiber main frame
• NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Highly efficient bevel wheel design is used in mesh between main gear and motor gear
• Outer-rotor motor as the main power is powerful and makes the flight much stable
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• CCPM mode with adjustable pitch system and 3D conversion
• Autorotation landing protection
• One-way bearing and landing system with flameout function
• Tail rotor driven by belt transmission system provide stable flight and low noise
• Mode lock switch to free lock the parameters of PIT & PLT
• Main rotor driven by powerful Brushless Motor and tail rotor driven by belt transmission system
• NO TAIL Motor - Tail Rotor driven by belt transmission system with Servo Controlled Rudder like Gas-Helicopter
• No need to worry about burning tail motors
• Tail blade adopt flameout landing system
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• Perfect for people who wants to move up from 4ch helicopter
• PCM receiving and transmitting system increases the operation stability
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Almost Unbreakable Rotor Head
• High quality individual lock tail gyro
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Metal ball swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Outdoor/Backyard/Stadium
• Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter does have very strong structure
• Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)
• Professional Lifetime Tech Support only at Banana Hobby

• Main Rotor Diameter: 700mm (28 inch)
• Tail Rotor Diameter: 150mm (6 inch)
  
• Overall Length: 660mm (26 inch)
• Height: 230mm (9 inch)
• Width: 120mm (5 inch)
• Motor Pinion Gear: 13T
• Main Drive Gear: 150T
• Drive Gear Ratio: 1:11.5:4.24
• Weight: 390g
• Flying Weight: Approx.740-770g
• Drive system: 3500KV Brushless motor
• Servo: 4x 9g Towerpro high speed micro servos and Outside Piezo Gyro
• Speed Controller: Pentium 30A Brushless ESC
• Battery: 11.1V 2200mah 20C Li-Polymer
• Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
• Radio Control Range: 2500 feet (762m)

• Pigeon 450M1 Helicopter (100% assembled) w/ Carbon Fiber Main Blades
• 6CH CCPM Multifunctional FM Transmitter
• Aluminum Alloy Carrying Case
• Li-Po Battery Balance Charger w/ AC Adaptor
• 11.1V 2200mAh 20C Rechargeable Li-Po Battery
• English Manual