Simplified and minimized structure, highly efficient tail motor, CCPM mode with alterable pitch system, 130SD carbon brh motor used as the main drive, tail rotor driven by tail motor, 7-ch multifunctional transmitter and 4-in-1 receiver, PCM receiving and transmitting system -- increases the operation stability. Suitable for flight course and 3D aerobatic flight. Optional Li- poly battery will help to achieve better performance and longer flight time.

• New 7 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , rudder mixing, throttle curve, servo exponential function, rudder exponential functions, and multistage electricity volume show on the panel
• 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• Perfect for people who wants to fly both 4CH/6CH heicopters
• Metal main body, brand new design for the minimized structure with high precise and good stability, which is an optimal 3D model for indoor entertainment
• PCM receiving and transmitting system increases the operation stability
• PCM 0702 transmitter with Phase-Locked Loop circuit provides you with 6 frequency points to be freely switched without any trouble of changing crystal oscillator
• 90°/120° mixing swashplate structure can perfectly upgrade to CCPM mixing collective pitch system
• Tail motor of high efficiency with a rational gear ratio is not only easy to be adjusted, but also can make flight stable
• 4.3g servo of high efficiency is prompt in reaction and makes vario flight courses safe
• the V2 knob on the transmitter can adJust the sensitivity of built-in gyro avoids the trouble to adJust in the helicopter model, and meets the demand for all kinds of aerobatic flights
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• Simplified and minimized structure, and highly efficient tail motor
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• CCPM mode with adjustable pitch system and 3D conversion
• Mode lock switch to free lock the parameters of PIT & PLT
• Hard, Lightweight Main Blades
• Autorotation landing protection
• Lightweight body built with strong materials
• Brand new design for the structure
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• 12V 350mAH Ni-MH battery provide enough power for any aerobatic flight
• Powerful 130SD carbon brushed motor used as the main drive, and tail rotor driven by tail motor
• Tail blade adopt flameout landing system
• Provide excellent performance indoor
• Easy to fly and more stable lifting
• High Quality mixer + gyro board built-in
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Metal ball swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Backyard/Park with calm weather
• Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality foam materials, which is not easily break.
• Approximately 8 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available.
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Main rotor diameter: 345 mm (13.5 inch)
• Tail rotor diameter: 100 mm (4 inch)
  
• Overall Length: 370mm (14.5 inch)
• All-up weight: 204g (Battery included)
• Driven system: 130SD carbon brushed motor
• Servo: 3X 4.3g Servos (speed 0.11sec/60°; torque 0.5kg/cm ; dimension 20X8.5X22.5mm)
• Gyro: Built in
• Battery: 12V 350mAh Ni-MH
• Control system: 7CH WK-0702 CCPM PCM Multifunctional FM Transmitter and 4-in-1 RX-705 Receiver
• Radio Control Range: 2500 feet (762m)

• Helicopter (100% Assembled)
• 7 Channel WK-0702 Multifunctional FM R/C Transmitter
• Wall Battery Charger
• 12V 350mAh Ni-MH Rechargeable Battery
• English Manual