| | New Intelligent Digital Mutifunctional R/C Power 60IBC Microprocessor Controlled High-Performce Rapid Charger/Discharger for NiCD/NiMH/Li-poly/Pb Batteries w/ Voltage Balancer | | |
| | Item No: 1178
| Usually Ships in 1 to 3 Business Days List Price: $300.00
Our Price: $129.90
|
|
|
|
Brand New! X-Power R/C Power 60IBC Intelligent Digital Microprocessor controlled High-performance Rapid Charger/Discharger for Ni-CD/Ni-MH/Li-Poly/Pb Batteries with Cell Voltage Balance. It is one of the Best Balance Charger you can get with Maximum Safety. This kit equipped with vario connectors plugs all over the world.
|
- Charge current up to 5A, 1 to 5 series of Li-ion/poly,
1~14 cells of NiCD/NiMH, 6to 12V lead acid(Pd)
- Equipped with vario connector plugs all over the world
- Maximum safety !!!
- Delta-peak sensitivity
- Capacity limit
- Temperature limit
- Processing time limit
- Input power monitor
- Automatic cooling fan
- Include USB communicated analysis (Monitor software
supported)
- High-power and high-performance circuit
- Optimized operating software
- Rapid charger that is computerized with a high
performance microprocessor and specialized operating software
- Monitoring the voltage of individual cell
- Data store/load
- Voltage balancer for Li-polymer battery has an
individual-cell-voltage balancer inside, so it does not
need any balancer separately when charging Li-poly battery
for cell balancing
- The automatic charge termination program works on the
principle of the Delta-peak voltage detection
- The charging capacity always calculated by multiple of
the charging current and time
- If the charging capacity exceeds the limit, the process
will be terminated automatically when you set the maximum
value
- The temperature of the battery on the charging will rise
by its internal chemical reaction. If you set the limit of
the temperature, the process will be expired forcibly when
the limit has reached.
- You can also restrain the maximum process time to
prevent from any possible defect
- To protect the car battery using as input power from
being damaged, the voltage of it always monitored. If it
drops below the lower limit, the process will be ended
automatically
- This charger employs the circuit that has maximum output
power of 50W. As a result, it can charge of discharge up to
14 cells of NiCd/Ni-MH and 5 series of Li-poly batteries
with maximum current of 5.0A
|
- Length: 280 mm (11 inch)
- Width: 203mm (8 inch)
- Height: 127mm (5 inch)
- Computerized balance charging system
- Li-ion/Polymer: 1~5 series
- Ni-MH/Ni-CD: 1~14 cells
- Lead Acid(Pb): 6 .12V
- Charging Rate: 0.1A-5A; discharge rate: 0.1A-2A
- Battery Memory: 10models
|
- Intelligent RC-Power 601BC Balance Charger
- USB PC Link Cable
- 100~240V Toshiba AC-DC Adaptor
- Monitor Software
- Multifunctional Connectors for Charging Vario Kind of Battery
- English Manual
|
|
|